Introduction To The Panel Sound Alert & Backlight; Installing The Wireless Alarm System - Mace MAS-WA-SYS User Manual

1.5 i
ntrOductiOn
Operating Mode
ARM
1
2 HOME
3 ALERT
4 STANDBY
SECTION 2: INSTALLING THE WIRELESS ALARM SYSTEM
2.1 i
nStallinG
WARNING:
The Wireless Alarm Panel has a built-in tamper proof switch to prevent the system being disabled by
an intruder. When fixing the Wireless Alarm Panel to a wall, first ensure that it is in STANDBY mode to
avoid the alarm sounding.
2.1.1 l
OcatinG the
The Wireless Alarm Panel should be placed:
• Within a few feet of an electrical outlet
• Where it is easily accessible
• Away from doors or windows that could be accessed by intruders
• Away from extreme temperature sources (radiators, ovens, stoves etc.) and large metal objects
that could interfere with the wireless performance
2.1.2 w -m
all OuntinG
• First cut out the
mounting template
for the Wireless
Alarm Panel along
with the area which
is marked out for
the position of
the tamper proof
magnet.
6
P
tO the anel
Situation
Zone triggered
under ARM status
Alarm set under
ARM status
Zone triggered
under ARM status
Zone triggered
under ALERT status
Zone triggered
under ALERT status
Silent
w
the ireleSS
w a P
ireleSS larm
w a
the ireleSS
MAS-WA-SYS
S a
Ound lert
Sound Alert and Backlight Indication
Alarm duration: Adjustable between 1 – 6 minutes (siren).
Default is 1 minute
Panel — flashes RED every 1.5 seconds with triggered zone indicated
(to stop - enter 4-digit PIN and press
No siren.
Panel — flashes RED every 5 seconds providing an
intruder deterrent (different from when an intrusion occurs and the
panel rapidly and continuously flashes RED).
Alarm duration: Adjustable between 1 – 6 minutes (siren).
Default is 1 minute
Panel — flashes RED every 1.5 seconds with triggered
zone indicated (to stop - enter 4-digit PIN and press
Sound output: Chime (ding-dong)
Panel — flashes GREEN every 1.5 seconds with triggered zone
indicated (to stop panel flashes-press
Sound output: Chime (ding-dong)
Panel — flashes GREEN every 1.5 seconds with triggered zone
indicated (to stop panel flashes press
Panel — YELLOW backlight remains ON for 10 seconds
after entering into STANDBY mode
a P
larm anel
& t
anel amPer PrOOf
P & t
larm anel amPer
84mm
Mount tamperproof magnet here
& B
ackliGht
)
)
)
)
S
witch
S
PrOOf witch
MAS-WA-WDS
16mm
MAS-WA-MO