Connections And Editing - Sony DVCAM DSR-70A Operating Instructions Manual

Reference Video Signals for Analog Signal Editing
In order to provide stable video and audio signals for
analog editing, it is necessary for the built-in time base
corrector (TBC) to operate correctly. To ensure this,
input a reference video signal synchronized with the
video signal to the REF. VIDEO IN connector and set
the REF. VIDEO IN 75 Ω termination switch to ON.
Connections and
Settings
Chapter
REF. VIDEO IN connector
and 75 Ω termination switch
Chapter 8 Connections and Settings
8
119