Sony DVCAM DSR-70A Operating Instructions Manual page 36

Power Preparations
36
Chapter 2 Power Preparations
1
Remove the cover of the battery connector.
2
Insert the V-wedge shoe on the AC-DN2A/DN2B in the V-groove on
one unit and slide the AC-DN2A/DN2B until the battery charging
connector is connected to the battery connector.
3
Use the DC power cord (supplied with the AC-DN2A/DN2B) to
connect the DC output connector on the AC-DN2A/DN2B and the DC
IN connector on the rear of another unit.
To DC output connector
4
Supply the AC-DN2A/DN2B with AC power.
For information about how to supply AC power to the AC-DN2A/DN2B, refer
to the manual for the AC-DN2A/DN2B.
Battery charging
connector
Battery connector
DC IN
DC power cord
(supplied with the
AC-DN2A/DN2B)