Connections For Component Analog Recording (Optional Dsbk-170 Required) - Sony DVCAM DSR-70A Operating Instructions Manual

Connections for Component Analog Recording
(Optional DSBK-170 Required)
The following shows connections for a system in
which analog playback signals from another recorder
or player are recorded on the DSR-70A/70AP. In this
system, the video signals are analog component signals
and the audio signals are recorded from audio channels
1 and 2.
AUDIO IN
AUDIO
INPUT
CH-2
AUDIO
INPUT
CH-1
DSR-70A/70AP
(recorder)
Settings on the DSR-70A/70AP
Switch Setting
AUDIO INPUT CH-1/ Normally +4 dBu
CH-2 level adjustment
knobs
REMOTE/LOCAL switch LOCAL (When controlling the
unit from an editing controller, set
to REMOTE.)
IN/OUT switch (on the IN
DSBK-170)
124
Chapter 8 Connections and Settings
Note
In this case, the DSBK-170 Analog Component Iuput/
Output Board is required.
1
1
2
TC IN
DSBK-170(Y,R–Y,B–Y)
2
CH-1 CH-2
TC OUT AUDIO
OUT
Videocassette recorder/
player such as
UVW-1600/1600P
COMPONENT 2
OUTPUT
1 Cable with XLR connectors
(not supplied)
2 75 Ω coaxial cable (not supplied)