Setting Edit Points - Sony DVCAM DSR-70A Operating Instructions Manual

Setting Edit Points

Selecting an Edit Mode
In editing operations, there are four edit points: an IN
point and an OUT point on the recorder side, and an
IN point and an OUT point on the player side. As soon
as you set three of the edit points, the fourth edit point
is calculated automatically.
In insert editing, you can set IN points for audio
separately from the IN points for video (audio split
editing).
Setting Edit Points
Proceed as follows to set edit points.
AUDIO IN
DELETE
PREVIEW
1
Rotate the player side jog or shuttle dial to find the
player edit points.
For details about jog/shuttle dial operations, see
"Finding Edit Points — Search" (page 79).
2
Press the IN button together with the ENTRY/
SHIFT button at the point you want to set as the IN
point. Press the OUT button together with the
ENTRY/SHIFT button at the point you want to set
as the OUT point.
The IN and OUT points are set, and the IN and
OUT buttons light.
80
Chapter 5 Editing
1
– +
TRIM
CLIP
LIST MARK
LINK
ENTRY SHIFT
IN OUT
AUTO EDIT REVIEW
For details, see "To set audio IN points separately from
video IN points (audio split editing)" (page 81).
Note
If it is necessary to operate the buttons or dial on the
player, set setup menu item 006 "LOCAL FUNCTION
ENABLE" to ENA beforehand (see page 104).
AUDIO IN
– +
TRIM
CLIP
LIST MARK
LINK
DELETE ENTRY SHIFT
2
IN OUT
PREVIEW AUTO EDIT REVIEW
AUTO EDIT button
PREVIEW button
3
Repeat steps 1 and 2 on the recorder side to set the
recorder IN or OUT point.
As soon as you set three edit points on the player
and recorder, the PREVIEW button and the AUTO
EDIT button light to indicate that you can conduct
a preview or edit.
Note
If you set four or more edit points on the player
and recorder, the DELETE button flashes. You
cannot conduct an edit when the unit is in this
state. Delete the unneeded edit points.
For details, see "Modifying Edit Points" (page 83).
3