Password Setting; Password Override - Lindy C5 Pro 39393 User Manual

Kvm extender c5 pro
Table of Contents

Advertisement

English Manual

5.4 Password setting

Password protection allows you restrict access to the system only to authorised personnel. A password first
needs to be set and then, using the keyboard attached to the REMOTE module, a simple key sequence allows
the system to be quickly and securely detached from its peripherals.
To set a password
1
Simultaneously, press the hotkeys (by default,
mode.
P
2
Press
followed by
3
Now enter your new password, within the following constraints:
Passwords are NOT case sensitive,
Passwords may be any length from 1 character to a maximum of forty characters,
The following keys may NOT be used:
4
When you have entered the password, press
f
5
Press
once more to exit configuration mode.
For full details about how to lock and unlock the system using your password, please see section 4.2 'Locking
and unlocking the system.'

5.5 Password override

This mode allows you to override the password that has been set at the REMOTE module and place it into
configuration mode so that a new one may be set. This feature is particularly useful when passwords have
been lost or forgotten.
To override the REMOTE password
1
Remove power from the REMOTE module.
2
With power to the system and LOCAL module still applied, change LOCAL switch 1 to the
ON position.
3
Re-apply power to the REMOTE module. The REMOTE module will go directly into
configuration mode so that the old password can be cleared and a new one set.
To clear a password: (within configuration mode) Press
followed by
You can now enter a new password using the procedure outlined in steps 2 to 5 of
section 5.4 'Password setting', or press
4
Return LOCAL switch 1 to it's OFF position.
Note: If switch 1 remains ON, then the REMOTE module will enter configuration mode
whenever it is repowered and will not operate normally.
LINDY KVM Extender C5 Pro
f
.
f
again.
Installation and Use
b
j
and
) along with
b
a
j
,
,
f
to signal its completion.
P
f
to exit configuration mode.
f
to enter configuration
f
or
.
f
followed by
and
page 22

Advertisement

Table of Contents
loading

Table of Contents