Configuration Mode; Password Setting - Lindy PRO-300 User Manual

English Manual
5.3 Entering, using and exiting configuration mode
To enter and use configuration mode:
1 Simultaneously press the currently configured hotkeys
(by default, <CTRL> and <SHIFT>) along with <RETURN>
The three keyboard indicators ('Num Lock', 'Caps Lock'
and 'Scroll Lock') will now begin to flash in sequence to
show that you are in configuration mode.
2 Press the first letter of the required configuration option,
for instance <F>
All three keyboard indicators will illuminate continuously.
3 Press the number of the required configuration option, for
Instance <8>
The 'Scroll Lock' indicator will extinguish, leaving the 'Num Lock' and
'Caps Lock' indicators lit.
4 Press <RETURN> to confirm your option
The three keyboard indicators ('Num Lock', 'Caps Lock' and
'Scroll Lock') will now begin to flash in sequence again.
To exit from the configuration mode:
1 Within configuration mode, the three keyboard indicators should be flashing in sequence to show that
the module is ready to receive a new command.
2 Press <RETURN>.
The three indicators will return to their normal states.

5.4 Password setting

Password protection allows you restrict access to the system only to authorised personnel. A password first
needs to be set and then, using the keyboard attached to the REMOTE module, a simple key sequence allows
the system to be quickly and securely detached from its peripherals.
To set a password
1 Simultaneously, press the hotkeys (by default, <CTRL> and <SHIFT>) along with <RETURN> to enter

configuration mode.

2 Press <P> followed by <RETURN>.
3 Now enter your new password, within the following constraints:
•
Passwords are NOT case sensitive,
•
Passwords may be any length from 1 character to a maximum of forty characters,
•
The following keys may NOT be used: <CTRL>, <ALT>, <SHIFT>, <RETURN>
4 When you have entered the password, press <RETURN> to signal its completion.
5 Press <RETURN> once more to exit configuration mode.
For full details about how to lock and unlock the system using your password, please
see section 4.2 'Locking and unlocking the system.'
LINDY KVM Extender C5 PRO-300 Installation and Use page 17