English Manual
To restore mouse operation when hot plugging:
1
Carefully connect the Extender C5 modules to the system and its keyboard, mouse, monitor,
audio and serial device.
2
Simultaneously, press the hotkeys (by default,
configuration mode.
3
Enter the appropriate restore function code:
PS/2 – press
•
IntelliMouse – press
•
4
To exit configuration mode, press
5
Move the mouse a short distance and check for appropriate onscreen cursor movement. If
the mouse cursor darts erratically around the screen, then cease moving the mouse. This is
an indication that the chosen restore function is incorrect. Try again using the other restore
function.
Note: The restore functions predict the likely mouse resolution settings but may not restore
the exact speed or sensitivity settings that were originally set.
Microsoft and Logitech – specific mouse settings
In certain installations some Logitech mouse drivers may lose the action of the mouse buttons when
used with the standard 'Microsoft compatible' signalling protocol used between the modules. To
solve this problem, select the 'Logitech compatible' mouse signalling protocol.
To change mouse signalling protocols
1
Simultaneously, press the hotkeys (by default,
configuration mode.
2
Enter the appropriate protocol code:
Microsoft compatible – press
•
Logitech compatible – press
•
3
To exit configuration mode, press
LINDY KVM Extender C5 Pro
M 6 f
M 7 f
f
.
M 3 f
M 4 f
f
Installation and Use
b
j
and
) along with
b
j
and
) along with
f
to enter
f
to enter
page 24