Table of Contents
Advertisement
English Manual
5.3 Entering, using and exiting configuration mode
To enter and use configuration mode:
1
Simultaneously press the currently configured hotkeys
b
(by default,
The three keyboard indicators ('Num Lock', 'Caps Lock'
and 'Scroll Lock') will now begin to flash in sequence to
show that you are in configuration mode.
2
Press the first letter of the required configuration option,
F
for instance
All three keyboard indicators will illuminate continuously.
3
Press the number of the required configuration option, for
8
instance
The 'Scroll Lock' indicator will extinguish, leaving the 'Num Lock' and
'Caps Lock' indicators lit.
f
4
Press
to confirm your option
The three keyboard indicators ('Num Lock', 'Caps Lock' and
'Scroll Lock') will now begin to flash in sequence again.
To exit from the configuration mode:
1
Within configuration mode, the three keyboard indicators should be flashing in sequence to show that
the module is ready to receive a new command.
f
2
Press
.
The three indicators will return to their normal states.
LINDY KVM Extender C5 Pro
j
and
) along with
Installation and Use
f
page 21
Advertisement
Table of Contents
