Table of Contents
Advertisement
English Manual
4.2 Locking and unlocking the system
In situations where the computer system (and the LOCAL module) can be locked away the Extender C5 set
offers a viable security system to deter unauthorised use. Once a password has been set, a simple key
sequence allows the system to be quickly and securely detached from its peripherals. Only the correct password
will reconnect the remote and local modules.
To lock the system
1
First set a password. For further details, please refer to
section 5.4 'Password setting.'
2
Simultaneously press the currently configured hotkeys
b
(by default,
The screen will go blank and the three keyboard
indicators will begin alternately flashing between the
'Num Lock' and 'Scroll Lock', and 'Caps Lock'. This
sequence indicates that a password is required.
To unlock the system
1
Enter the correct password and press
Note: Passwords are NOT case sensitive.
Note: If an invalid password has been entered and the keyboard indicators are not flashing as described
f
above press
2
If the correct password is entered, the screen will be restored and normal operation can continue.
To enable the video
Simultaneously press the currently configured hotkeys (by default,
command will be required to restore the video if
has been set.
To disable the video
Simultaneously, press the currently configured hotkeys (by default,
LINDY KVM Extender C5 Pro
j
and
)along with
f
to clear the incorrect attempt.
b
Installation and Use
L
.
.
b
j
and
along with
b
j
1
and
along with
L
is used when no password
j
and
) along with
. This
0
.
page 19
Advertisement
Table of Contents
