Default Setting - Supermicro X9DA7 User Manual

Jumper
JBT1
JI C1/JI C2
2 2
JPI1
JPL1
JPME1
JWD1
Connectors
7.1 Audio
Battery
CNF1/CNF2
COM1
CPU1 Slot1/Slot3
CPU2 Slot2
CPU2 Slot4
CPU2 Slot5
CPU2 Slot6
FAN1~7, FANA
J18
J22
JD1
JF1
JL1
JOH1
JPI C1
2
JPWR1/JPWR2
JSD1
JSPDIF_In
JSPDIF_Out
JTPM1
KB/Mouse
LAN1/2
X9DA7 Jumpers
Description
Clear CMOS
SMBus to PCI-E Slots
IEEE1394a Enable
GLAN1/GLAN2 Enable
Management Engine (ME) Recovery
Mode Enable
Watch Dog Timer Enable
X9DA7 Connectors
Description
8 Channel (7.1) High-Definition Backplane Audio Connector
Onboard CMOS Battery (See Chapter 3 for Used Battery Disposal)
IEEE 1394a 1/2 Connectors
Backplane COM Port1
PCI-E 3.0 x16 Slots (Available when CPU1 is installed.)
PCI-E 3.0 x4 Slot (Available when CPU2 is installed.)
PCI-E 3.0 x4 in x8 Slot (The slots are available when CPU2 is installed.)
PCI-E 3.0 x16 Slot (Available when CPU2 is installed.)
PCI-E 3.0 x8 Slot (The slots are available when CPU2 is installed.)
CPU/System Fan Headers (Fan6/Fan7: CPU 1/2 Fans)
Front_Panel Audio Header
ATX 24-Pin Power Connector (See Warning on Pg. 1-6.)
Speaker/Power LED Indicator
Front Panel Control Header
Chassis Intrusion
Overheat/Fan Fail LED Indicator
Power Supply SMBbus I
12V 8-Pin Power Connectors (See Warning on Pg. 1-6.)
SATA DOM (Device_On_Module) Power Connector
SPDIF_(Sony/Philips Digital Interface)_In Header
SPDIF_(Sony/Philips Digital Interface)_Out Header
TPM (Trusted Platform Module)/Port 80 Header
(PS2) Keyboard/Mouse Connector
Gigabit Ethernet LAN Ports 1/2
1-5
C Header
2
Chapter 1: Overview

Default Setting

See Chapter 3
Pins 2-3 (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Reset)