Internal Speaker; Power Led/Speaker - Supermicro X9DA7 User Manual

X9DA7/X9DAE Motherboard User's Manual

Internal Speaker

The Internal Speaker, located at SP1,
can be used to provide audible indica-
tions for various beep codes. See the
table on the right for pin definitions.
Refer to the layout below for the loca-
tions of the Internal Buzzer (SP1).

Power LED/Speaker

On JD1 header, pins 1-3 are used for
power LED indication, and pins 4-7
are for the speaker. See the tables
on the right for pin definitions. Please
note that the speaker connector
pins (4-7) are used with an external
speaker. If you wish to use the on-
board speaker, you should close pins
6-7 with a jumper.
S I/O
JPME1
JBR1
J23
USB5/6
Battery
1394a A
CTRL
BIOS
Intel
STBY1
C602
SAS
CTRL
B
USB3.0 2/3
L-SAS0~3
L-SAS4~7
LAN1/2
USB3.0 0/1
Audio FP
FAN5
7.1 Audio
KB/Mouse
USB2.0
0/1/2/3
FAN7
(CPU2 Fan)
CPU2
X9DA7/E
Rev. 1.0
CPU1
FP CTRL
2-30
Internal Buzzer (SP1)
Pin Definition
Pin# Definitions
Pin 1 Pos. (+) Beep In
Pin 2 Neg. (-) Alarm
Speaker
PWR LED Connector
Pin Definitions
Pin Setting Definition
Pin 1 Anode (+)
Pin2 Cathode (-)
Pin3 NA
Speaker Connector
Pin Settings
Pin Setting Definition
Pins 4-7 External Speaker
Pins 6-7 Internal Speaker
A. Internal Speaker
(Buzzer)
COM1
B. PWR LED/Speaker