Table of Contents
Advertisement
AIMB-250 Series
1. Getting Started
1.1 Safety Precautions
Warning!
Caution!
1.2 Packing List
Before you begin installing your single board, please make sure that the
following materials have been shipped:
10 AIMB-250 Series User's Manual
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1 x AIMB-250 Intel Socket 478/479 Pentium® M/Celeron® M Mini ITX
Main Board (Onboard Intel® Celeron® M 600 MHz with 0K L2 Cache or
Intel® Processor at 800 MHz
1 x CD-ROM or DVD-ROM contains the followings:
User's Manual (this manual in PDF file)
Intel INF driver
Ethernet driver and utilities
VGA drivers and utilities
Audio drivers and utilities
1 x IDE HDD cable (40-pin, pitch 2.54mm)
1 x IDE HDD cable (44-pin, pitch 2.0mm)
1 x FDD cable (34-pin, pitch 2.54mm)
3 x Serial port cable with 1 DB9P(M) (10-pin, pitch 2.54mm)
Startup manual
1 x I/O bracket
1 x Pentium® M CPU cooler
Advertisement
Table of Contents
