Getting Started/入门指南/入門指南; Specifications/规格/規格; Hardware Specifications/硬件规格/硬體規格 - Advantech ACP-2010 User Manual

4.1 Getting Started/ 入门指南 / 入門指南
Configuring the Intelligent System Module
An Intelligent System Module comes pre-installed inside your system chassis. The
hardware switch will be fine tuned according to your system layout. With different
system layouts, we can configure Intelligent System Module using H/W switch.
Please refer to "Switch Setting" section for detailed information. For remote manage-
ment functions, you will need to install WISE-PaaS/RMM. After installing you will be
able to monitor the system's fan speed, system temperature, CPU temperature, and
voltage. You can also set your own alarm settings under WISE-PaaS/RMM according
to your requirements. For detailed information, please refer to user the guide of
WISE-PaaS/RMM.
配置智能系统模块
智能系统模块已经预安装在系统机箱内。用户可根据不同的系统布局微调硬件开关。
有关详细信息，请参考 " 开关设置 "。对于远程管理功能，用户需安装 WISE-PaaS/
RMM 才能监控系统风扇转速、系统温度、CPU 温度和电压。用户也可根据特定需求在
WISE-PaaS/RMM 中调整报警设置。有关详细信息，请参考 "WISE-PaaS/RMM 用户指南
"。
配置智慧系統模組
智能系統模組會預先安裝在系統機箱中。硬體的開關也會根據系統需求做調整。根據
不同的系統狀態，智能系統模組可以經由調整跳線開關來更改設定。用戶可以通過安
裝 WISE-PaaS/RMM 遠端管理系統的系統風扇速度、系統溫度、CPU 溫度、電壓等相關訊
息。同時客戶也能在 WISE-PaaS/RMM 中調整系統的告警標準。 更多詳細訊息請參考
WISE-PaaS/RMM 使用手冊。
4.2 Specifications/ 规格 / 規格
4.2.1 Hardware Specifications/ 硬件规格 / 硬體規格
1 x 10-pin hardware switch to configure alarm settings

1 x SMBus interface for system and main board healthy status monitoring

Up to 4 external temperature sensors

7 x Fan tachometer inputs

1 x External IPMI module connector

1 x Built-in buzzer for system health status notice

Automatic smart fan control

Reserved PCB layout for gravity and humidity sensor


1 x 用于配置报警设置的 10 针硬件开关

1 x 用于监控系统和主板健康状态的 SMBus
 多达 4 个外置温度传感器

7 x 风扇转速计输入

1 x 外置 IPMI 模块接口

1 x 用于提示系统健康状态的内置蜂鸣器
 自动智能风扇控制
ACP-2010/2320 (3-in-1) User Manual 28