Store Performance; Save Changes To A Different Performance (Or Create A New One); The Performance Name - GEM WK2 Owner's Manual

Store Performance

The STORE PERFORMANCE button allows you to memorise the current panel setting to
the Performance at any moment. Be sure to use the STORE PERFORMANCE function
after carrying out one of the operations described in the previous paragraph; in this way you
will "photograph" the current panel situation at all times.
Confirm or cancel the Store Performance operation with ENTER or ESCAPE.
The PERFORMANCE RECALL/STORE PERFORMANCE button also gains direct access
to the Performance mode; the arrowhead positions itself automatically next to the PERF
menu function.
Even if you program all the available Performances with new settings, the original factory
settings can be restored at any time with the RESTORE function (remember to save your
programmed Performances to disk before using restore). Saving Performances to Floppy
Disk or Hard Disk is explained in the Disk & Hard Disk chapter.
If you modify the first Performance of the 63 available, every time you turn on the WK2, it will
power up to the programmed setting.
You can also choose not to store your programmed Performances to disk by taking advan-
tage of the battery-backed RAM which retains data after power down. Bear in mind, how-
ever, that if the batteries loose their charge, all your programmed data stored in memory will
be irremediably cancelled.
To recap, to memorise a Performance, you should
1) Hold down the STORE PERFORMANCE button for a few seconds.
2) Confirm the display confirmation request (?) with ENTER.
Hint: When you select a STYLE with SINGLE TOUCH PLAY active, the original
factory set Performance associated to the Style is recalled, which you can modify and
save to another Performance.

SAVE CHANGES TO A DIFFERENT PERFORMANCE (OR CREATE A NEW ONE)

To save the Performance to a location other than the current position, use the following
procedure:
1. Hold down the STORE PERFORMANCE button for a few seconds.
2. Rotate the Dial to select a different Performance.
The 3 Digit display area will show the selected Performance number (e.g. P01).
3. Press ENTER to confirm.
The Performance will be memorised to the selected location.

THE PERFORMANCE NAME

To change the name of a Performance:
1. Check that the arrowhead to the left of the display is next to the PERF menu function.
2. Press the PAGE [ ] or [ ] to pass to the name page.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
28 Owner's Manual
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
GrandPN?
GrandPN?