Hard Disk Partition Formatting Procedure; Creating A New Partition (New Part) - GEM WK2 Owner's Manual

HARD DISK PARTITION FORMATTING PROCEDURE

This operation allows you to cancel all data contained in a partition and, as a result, elimi-
nate the partition from the HD directory.
1. Press HARD DISK and rotate the DIAL to select the desired partition.
2 Press ENTER.
3 Move the right display arrows next to the FORMAT menu function with the cursor buttons.
The display shows the message "DelPart?" as a request of confirmation of the format-
ting process.
4 Press ENTER to confirm the request then press ENTER once again to complete the operation.

CREATING A NEW PARTITION (NEW PART)

On the right hand selection keypad, the button "+100/NEW" allows you to create a new
partition when you are working with the Hard disk.
1. Press the HARD DISK button.
2. Press the "+100/NEW" button.
The display requests confirmation with the message: "New Part?".
3. Confirm with ENTER.
4. At this point, you can insert a name for the new partition.
Use the keyboard to write the name. Up to
5. Press ENTER.
The display requests confirmation of the operation with the message: "SURE ? ".
6. Press ENTER again.
After a short instant, the new Hard Disk partition will be created.
8 characters can be used.
Part.01
DelPart?
NewPart?
SURE?
○ ○ ○ ○ ○ ○
Disk & Hard Disk 51
○ ○ ○ ○ ○ ○ ○