GEM WK2 Owner's Manual page 35

- PITCH/M: (ON/OFF) enables or disables the track for the action of the Pitch/Modula-
tion bass.
- PITCHRG: (00/12) determines the Pitch excursion for the bender. With the 00 setting,
the Pitch ball does not affect the track; any value above 00 indicates the pitch excursion
expressed in semitones (example, 12 = one octave).
- EDITSND: (ON/OFF) if a disk-based Song, in WK3 format, is loaded into memory, it
may contain one or more edited sounds; the ON setting (default) allows you to listen to
the edited sounds in playback, while the OFF setting recalls the sounds in their original
form without the memorised modifications.
All the modifications can be carried out using the DIAL or the + and – buttons of the right
hand selection keypad.
You can escape from an edit page at any time without losing your temporary modifications.
If you decide to change Performance, however, you must save the modifications, otherwise
they will be lost if you select either another Performance or the same one again.
Pitch
PitchRg>
EditSND<
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Sounds & Performances 27
>
○ ○ ○ ○ ○ ○ ○ ○ ○