Single Touch Play, Store Performance/Performance Recall, Style/Tempo Lock; Single Touch Play; Performance Recall / Store Performance; Style/Tempo Lock - GEM WK2 Owner's Manual

Single Touch Play, Store Performance/Performance Recall,

Style/Tempo Lock

SINGLE TOUCH PLAY

The SINGLE TOUCH PLAY button assigns the factory set sounds stored in ROM to all the
tracks (accompaniment as well as keyboard) for each Style/ In addition, this button acti-
vates the ARRANGE ON/OFF button (LED on) and the ARRANGE MEMORY function
(corresponding display indicator on).
When SINGLE TOUCH PLAY is off, selecting Styles recalls only the Style accompaniment
sections without changing the keyboard sounds.
The ON/OFF status of the SINGLE TOUCH PLAY button is shown in the display by the
corresponding indicator (S.T.PLAY).
With SINGLE TOUCH PLAY on, the function buttons (F1 ... F9) also recall 9 "Single Touch
Play" panel settings for the Real Time keyboard sections.
Each ROM Style is associated to 9 different possibilities, for a total of 864 situations, in
addition to the 96 basic configurations (one for each Style).

PERFORMANCE RECALL / STORE PERFORMANCE

This twin action button allows you select Performances, and to save all modifications to the
current Performance or to a different one.
As already explained, a Performance memorises various parameters that you can change
at will.
If you hold down the STORE PERFORMANCE for a few seconds then reply to the Perform-
ance store confirmation request ("?") with ENTER, all the modifications carried out up to that
moment are memorised to the PERFORMANCE.
If you want to maintain the 'old' Performance as well as the new one, rotate the DIAL before
pressing ENTER, and select a different location.
The Performance number appears in the 3 digit display area only after activating the STORE
PERFORMANCE command.
The PERFORMANCE RECALL / STORE PERFORMANCE button also allows quick ac-
cess to the PERFORMANCE function.
If you press and hold this button for about 2 seconds, the arrowhead goes directly next to
the "PERF" menu function and sets the instrument to Performance mode (without using the
cursor buttons).
STYLE/TEMPO LOCK
The STYLE LOCK function allows you to select Performances without changing the current
Style.
With STYLE LOCK active (corresponding display indicator on), you can pass from one
Performance to another without changing the Style.
If you hold down this button for about 2 seconds, the TEMPO LOCK function activates (as
already explained).
TEMPO LOCK and STYLE LOCK can both be active at the same time.
Activation of the TEMPO LOCK function is displayed by the alternate flashing of the Tempo
setting with the word 'LOC'. This function maintains the current Tempo setting for all Style
and Performance changes. When off, selecting a Style or Performance also recalls the
memorised tempo setting.
Single Touch Play settings
GrandPN?
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Note: In SONG and SONG STYLE modes, pressing
STORE PERFORMANCE only displays the number of the
selected destination (without showing the letter "P").
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
TEMPO
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
TEMPO
LOC
○ ○ ○ ○ ○ ○ ○ ○ ○
Styles 39