Digital Signal Processor; Reverb; Chorus; Assigning The Effect Types - GEM WK2 Owner's Manual

World keyboard
Table of Contents

Advertisement

• 8 Digital Signal Processor
WK2 allows you to route the Performances (Style/RealTime, Song Style and Song Per-
formances) to the on-board multi-effects processor which renders the overall sound more
realistic.
The Digital Signal Processor section consists of two units which process the Performances
with Reverbs and Delay/Modulation effects.
Each processor has an effects Send control to independently regulate the level (volume) of
the effect for each track of the current Performance.
The buttons which control the DSP are in the UTILITY section:

REVERB

When active (corresponding display indicator on), the current Performance is processed
the type of reverb effect assigned to the Reverb DSP unit. The overall processed ('wet')
sound can be heard over the internal speakers and delivered from the stereo Left and Right
outputs.
When deactivated, (display indicator off), the sound is not processed by the DSP (delivered
'dry').

CHORUS

When active (corresponding display indicator on), the current Performance is processed
the type of modulating effect assigned to the Chorus DSP unit. The overall processed ('wet')
sound can be heard over the internal speakers and delivered from the stereo Left and Right
outputs.
When deactivated, (display indicator off), the sound is not processed by the DSP (delivered
'dry').

Assigning the effect types

Regardless of the current mode (Style/Real Time, Song Style, Song mode), the method
used to select and assign the effects to the current Performance is identical.

HOW TO SELECT THE EFFECT TYPES

1. Press the Cursor buttons as many times as necessary until the left display arrowhead is next to
the REVERB or CHORUS menu function.
The display shows the effect type currently selected to the Performance.
2. Use the PAGE buttons to assign a different effect type to the selected DSP.
This operation allows you to scroll through the 22 effects available in both DSP units.
You can select an effect in both DSP units.
You can also change the general effect volume with the DIAL or the + and – buttons of
the right selection keypad.
3. You can escape from the current effect function by moving the arrowhead, or by pressing
ESCAPE.
The selected effect type(s) are now assigned to the current Performance.
4. Press STORE PERFORMANCE and confirm with ENTER to save the changes to the current Per-
formance.
If you select a different Performance, or reselect the same Performance without saving
the changes, the newly assigned effects will be lost and the original settings will be
restored.
64 Owner's manual
NB. To change the Rotary effect from Slow to Fast and
vice versa, use the ENTER or ESCAPE buttons.
Hall 1 >
I00
Chorus1>
I00
Hall 2 >
I00
Chorus2>
I00

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents