Get Started; Powering Up And Preliminary Operations; Power On/Off - GEM WK2 Owner's Manual

World keyboard
Table of Contents

Advertisement

• 1 Get started
In this chapter, you'll find step by step instructions on some basic functions that will help you
get to know your instrument right away.

Powering up and preliminary operations

POWER ON/OFF

The power switch (located on the left lateral panel) turns the keyboard on and off.
Insert one end of the power chord into the rear-panel mains socket, and the other end
into a suitable wall outlet.
Be sure that the local AC mains voltage matches the voltage specified on the instru-
ment's name plate.
Play on the keyboard and change the sounds
1. Play on the keyboard.
You will hear the "Piano" sound play across the full keyboard extension.
The group of Keyboard Activators (Upper 2, Upper 1, Lower) shows Upper 1 selected
(LED on), indicating that the UPPER 1 keyboard section is active to play.
The Upper 2 and Lower keyboard sections are also enabled for activation.
2. Press UPPER 2.
A second sound is introduced, layered with the first.
Pressing a single note on the keyboard plays two sounds simultaneously.
3. Press LOWER and play with both hands.
HaloPad
A third sound is introduced and the keyboard is now divided with a Split Point at note
B3. The LOWER keyboard plays over the range C2 - B3. The UPPER 1 and UPPER
2 sections are assigned to the range C4 - C7.
4. Adjust the overall volume.
Use the VOLUME sliding control (slider) to adjust the general volume of the instrument.
A comfortable level is about two thirds of the maximum course of the slider.
8 Owner's manual
Piano
Piano
Polysynth
Piano
Polysynth

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents