Operating With Additional Base Stations - BT Synergy 500 Twin User Manual

Operating with additional
base stations
You can use up to five handsets on
each Synergy 500 base station, and up
to four base stations with your
handset to build up a comprehensive
cordless telephone system.
Please note
One handset can only receive calls
from one base station at a time.
To register your handset to
another base station
You can register a handset
with up to 3 other base
stations.
Press and hold the
Page
button on the base station you
want to register your handset
to until you hear a beep.
Press the
The
In Use
Press the
button.
#
Enter the number of the
KEYPAD
desired base station.
Enter the base station PIN
PIN
(default: 0000).
Press the
You will hear a confirmation
tone.
PAGE
button.
QUICKDIAL
light will flash.
button, then the
button.
QUICKDIAL
To select which base station you
want your handset to use
When more than one handset
is being used you can extend
the handset range by
selecting which base you want
to use. The handsets can be
registered to different base
stations.
Press the
Press the
button.
8
8
Enter the number of the
KEYPAD
base station.
Press the
After a few seconds you will
hear a confirmation tone.
button.
QUICKDIAL
button, then the
button.
QUICKDIAL
20