Operating With Additional Base Stations - BT SYNERGY 1000 User Manual

Operating with additional base
stations
You can use up to six handsets on each Synergy
1000 base station, and up to four base stations
with your handset to build up a comprehensive
cordless telephone system.
The handset supplied with each base station is
already registered as HSET 1.
To register additional handsets to base
stations
Use the instructions shown on page 22, but
remember to start the sequence by pressing and
holding down the blue
station you want to register a handset with. It
sends a unique signal and your handset will
automatically accept it as the next base station.
Automatic connection to different base
stations
If each base station is connected to a different
telephone line, your handset can only make and
receive calls from one base station at a time.
NOTE:
If you move out of range of the base station, you
will lose the signal along with any current call.
Your handset will now search for the next
available base station to which it is registered.
button on the base
PAGE
To select a specific base station
For instance, if you are in an area where two or
more base stations overlap, you can choose the
one which is connected to the telephone line you
want to use.
• Press the button until the display shows
SET UP.
button. Display shows HANDSET.
• Press the
button. Display shows KEYTONES.
• Press the
• Press the button until the display shows
BASE.
button. Display shows CHANGE.
• Press the
button. Display shows BASE =
• Press the
(NO.). This is the base station your handset is
currently registered with.
• Either press the button to scroll through
and display the available base stations (
or press the number of the base station you
want ( ) on the keypad.
1-4
• Press the button. You hear a confirmation
beep. Display shows BASE = (e.g. 1 ) for two
seconds. The icon starts flashing to
indicate that the handset is searching for the
selected base. When the selected base is
found, the icon is extinguished and the
display changes to show HSET (e.g. 1 ). This is
your handset number on the new base station.
1-4
1-4
)
27