Operating With Additional Base Units - BT DIVERSE 1010 User Manual

Operating with
additional base
units
When planning to use a handset at more
than one base unit, it is recommended
that you:
• Assign a number to each base station,
from 1 to 4.
• Number each handset (1 to 6)
registered at each base station.
• Register the handsets at base unit 2
(and 3 and 4 if used) in the same order
as used for base unit 1.
• Activate the display of the base unit
numbers on each handset.
Handsets can only be used with the base units
displayed on screen.
If you move out of range of the displayed base
unit, and within range of another base unit,
your radio link will be automatically set up.
(Provided your handset has been registered
with the new base unit.)
If however you move out of range of the
displayed base unit, and within range of
another base unit during a call you will lose
your current call.
30