Register Handset With An Additional Base - BT STUDIO 2300 User Manual

52 Additional handsets and bases
To register a GAP compatible
handset to your BT Studio base,
please refer to the instructions
supplied with the handset you are
trying to register.
All the bases that a handset can be
linked to are indicated by an ,.
If you experience any problems, please call the Helpline on 0870 605 8047
4. If you have more than one base, scroll
the base. Press OK.
5. Enter the base's SYSTEM PIN (original setting 0000).
Press OK.

Register handset with an additional base

A handset registered with one base can then be registered
with up to three more bases, e.g. at work, at home, at a
relative's home.
Please ensure that you are in range of the base unit
before proceeding.
1. Press Menu then scroll
2. Register Handset
3. Scroll or to select the base. Press OK.
Vol
4. Enter the selected base's SYSTEM PIN (original setting
0000). Press OK.
5. At the base: press and hold
beep. The handset screen shows the base ID number,
press OK. The handset reverts to standby and
is given the first available handset number. It is now
registered to the new base and ready for use.
Vol
to Registration
is highlighted. Press OK.
until you hear the base
Page
or to select
and press OK.