Face Installation And Removal - Travis Industries 21 TRV GreenSmart Owner's Manual

Face Installation and Removal

The face has hooks that hold it in place. Make sure the face locks in place when installing.
PLATED SURFACES:
Make sure the plated surfaces are clean before starting
the fireplace. Any marks left on plated surfaces may
become etched in place. Clean plated surfaces with
denatured alcohol and a soft cloth.
© Travis Industries
Maintenance
4090403
b
Lift and rotate the face forward
until the top brackets lock into the
upper slots.
Tilt the face back
and insert the
bottom brackets
into the lower
slots until they
lock in place.
100-01209_000
13
a