GE Monogram ZV30RS Technical Service Manual page 13

3. Loosen the 2 wire retaining screws and
remove the wires from the heat lamp socket.
Heat Lamp Switch
Removal and Replacement
1. Remove the
Heat Lamp Panel
2. Press the switch clamps in and pull the
switch from the heat lamp panel.
3. Label and disconnect the 4 electrical
connectors from the heat lamp switch.
Surface Lights
Removal and Replacement
WARNING: Surface lights may be hot.
1. Turn the trim ring counterclockwise until it falls
2. Remove the light from the socket.
.
– 13 –
from the socket.
Retainer