Advertisement
Quick Links
ZV36SSFSS – GE Monogram 36" Stainless Steel Professional Hood
Dimensions and Specifications (in inches)
12"
18"
25"
Installation Clearances
These vent hoods are designed to be installed onto a wall or beneath a
soffit or cabinet.
• Install these hoods* 30" Min. to 36" Max. above the cooking surface.
*These hoods may be installed 24" min. above a gas or electric drop-in
style cooktop. Always observe the 30" to 36" clearance when installed
over any professional style cooktop or range.
Soffit Installation
SOFFIT
30" MIN.
36" MAX.
In this installation the ductwork running from the top of the hood will
be concealed in the soffit or upper cabinetry.
Specification Created 10/02
35-15/16"
35-15/16"
Note: Clearances may vary due to type of cooking product and local
codes. Check with local inspectors to be sure standard is applicable.
Wall Mount Installation
30" MIN.
36" MAX.
For this installation, a decorative duct cover is available to conceal the
ductwork running from the top of the hood. Use of the duct cover requires
special consideration to the installation height above the countertop.
For answers to your Monogram,
GE appliance questions, visit our website at
Listed by
Underwriters
GEAppliances.com or call
Laboratories
R
GE Answer Center
®
GE Profile
™
or
®
service, 800.626.2000.
Advertisement
Related Manuals for GE Monogram ZV36SSFSS
Summary of Contents for GE Monogram ZV36SSFSS
-
Page 1: Installation Clearances
ZV36SSFSS – GE Monogram 36" Stainless Steel Professional Hood Dimensions and Specifications (in inches) 35-15/16" 12" 18" 35-15/16" 25" Installation Clearances These vent hoods are designed to be installed onto a wall or beneath a soffit or cabinet. • Install these hoods* 30" Min. to 36" Max. above the cooking surface. -
Page 2: Power Supply
ZV36SSFSS – GE Monogram 36" Stainless Steel Professional Hood Advanced Planning Ductwork Planning • These vent hoods are equipped for 10" round ductwork. In most instances they may be transitioned to 8" round. • This hood may be vented vertically through upper cabinets, soffit or ceiling. - Page 3 ZV36SSFSS – GE Monogram 36" Stainless Steel Professional Hood Using Duct Cover Accessories To avoid unsightly gaps, plan the hood installation height for duct covers use. Use the following formula to calculate the need for one of more duct covers and to ensure a trouble free installation.
- Page 4 ZV36SSFSS – GE Monogram 36" Stainless Steel Professional Hood Specification Created 10/02 Features and Benefits • 640 CFM Vertical Exhaust • Variable Speed Fan Control • 2 Halogen Lamps with 4 Lighting Levels • Infrared Warming Lamp • Utensil Rod •...
Need help?
Do you have a question about the Monogram ZV36SSFSS and is the answer not in the manual?
Questions and answers