Related Manuals for Panasonic KX-TDE0101
Summary of Contents for Panasonic KX-TDE0101
- Page 1 MPR Card Conversion Guide IP Convergence Main Processing Card KX-TDE0101/KX-TDE6101 Model No. In this manual, the suffix of each model number is omitted (e.g., KX-TDE100NE).
-
Page 2: Table Of Contents
Table of Contents Table of Contents 1 Preparation ....................3 Safety Notices ........................3 Introduction ........................3 1.2.1 Requirements for Upgrade ....................4 2 Upgrading from a Hybrid IP-PBX to a Pure IP-PBX ......5 Procedure ..........................5 Data Reset After Upgrade ....................8 3 Restoring a Pure IP-PBX to a Hybrid IP-PBX .........9 Procedure ..........................9 MPR Card Conversion Guide... -
Page 3: Preparation
Pure IP-PBX (KX-TDE100/KX-TDE200/KX-TDE600) by replacing the MPR card. The following items are necessary for the upgrade: Model No. Name Description KX-TDE0101 IP Convergence Main The main processing card for controlling the Pure Processing Card (IPCMPR) IP-PBX (KX-TDE100/KX-TDE200). This card comes with an SD Memory Card and 2 ferrite cores included. -
Page 4: Requirements For Upgrade
1.2.1 Requirements for Upgrade Hybrid IP-PBX Type File Name Description System data file DSYS (KX-TDA100/KX-TDA200) Contains user-set PBX DLSYS (KX-TDA600) system data MPR file PMPR (KX-TDA100/KX-TDA200) Contains the main PLMPR (KX-TDA600) software for the PBX Language files DLNGx (x=0-5) Contains the text data shown on PT displays for supported languages Default value files... -
Page 5: Upgrading From A Hybrid Ip-Pbx To A Pure Ip-Pbx
2.1 Procedure 2 Upgrading from a Hybrid IP-PBX to a Pure IP-PBX To upgrade the system software from a Hybrid IP-PBX to a Pure IP-PBX while keeping the current user data, it is necessary to follow the procedure below. 2.1 Procedure Before replacing the MPR Cards, make sure that the software version of your PBX complies with the requirements for upgrade, and the Maintenance Console is installed on the PC. - Page 6 2.1 Procedure viii. Select the destination file. In Destination File Name, enter the desired name for the file to be converted. Note that the destination file name or location must be different from the source file name. If another file with the same name already exists in that location, it will be automatically overwritten. Click the "…"...
- Page 7 2.1 Procedure Select the converted system data file that was saved in Step 3. The file will be uploaded to the SD Memory Card as the backup system data file (DMSYS_S/ DGSYS_S), and a message will be displayed when the transfer is complete. Click OK.
-
Page 8: Data Reset After Upgrade
2.2 Data Reset After Upgrade 2.2 Data Reset After Upgrade Data that is stored in the SRAM of the PBX (not on the SD Memory Card), among other data, is cleared during the upgrade process. The data items listed below are all cleared by upgrade. •... -
Page 9: Restoring A Pure Ip-Pbx To A Hybrid Ip-Pbx
3.1 Procedure 3 Restoring a Pure IP-PBX to a Hybrid IP-PBX The following procedure allows you to return to using a Hybrid IP-PBX. Use this procedure if the upgrade process did not complete successfully. 3.1 Procedure Turn off the power to the PBX. Remove the IPCMPR/IPCEMPR Card that is currently installed in the PBX. - Page 10 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Copyright: This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd.