1.2.1 Requirements for Upgrade
Hybrid IP-PBX
Type
System data file
MPR file
Language files
Default value files
Pure IP-PBX
Type
System data file
MPR file
Language files
Default value files
1.2.1 Requirements for Upgrade
This upgrade is targeted at only certain versions of KX-TDA100/KX-TDA200/KX-TDA600 system software.
Before upgrading, please read the following notes:
–
The system software version of your Hybrid IP-PBX must be PMPR Software File Version 3.2xxx or
PLMPR Software File Version 5.0xxx. To upgrade the system software from earlier versions, refer to the
SD Memory Card Installation/Upgrade Guide for the Hybrid IP-PBX.
–
The SD Memory Card that is used with the Hybrid IP-PBX cannot be used with the Pure IP-PBX. Use the
new SD Memory Card included with the IPCMPR/IPCEMPR card.
–
Regardless of whether an MEC card is installed in the Hybrid IP-PBX or not, the upgrade to a Pure IP-PBX
will proceed under the assumption that the MEC card is installed.
–
Even if the CTI-LINK card setting is implemented in the system data file, it will be deleted during the upgrade
process.
–
The BUS-S card must be version 2.000 or later (KX-TDE600 only).
CAUTION
•
The SD Memory Card contains software for all the processes of the PBX and all the customer data. It
can be easily removed and taken away from the PBX by a third party. Therefore, do not allow
unauthorised access to prevent data leakage.
•
To prevent data leakage, render the SD Memory Card physically unusable before disposal.
4
MPR Card Conversion Guide
File Name
DSYS (KX-TDA100/KX-TDA200)
DLSYS (KX-TDA600)
PMPR (KX-TDA100/KX-TDA200)
PLMPR (KX-TDA600)
DLNGx (x=0-5)
DIxxx (KX-TDA100/KX-TDA200)
DLIxxx (KX-TDA600)
File Name
DMSYS (KX-TDE100/KX-TDE200)
DGSYS (KX-TDE600)
PMMPR (KX-TDE100/KX-TDE200)
PGMPR (KX-TDE600)
DLNGx (x=0-5)
DMIxxx (KX-TDE100/KX-TDE200)
DGIxxx (KX-TDE600)
Description
Contains user-set PBX
system data
Contains the main
software for the PBX
Contains the text data
shown on PT displays for
supported languages
Contain default value
data
Description
Contains user-set PBX
system data
Contains the main
software for the PBX
Contains the text data
shown on PT displays for
supported languages
Contain default value
data