Panasonic KX-TDE0101 Manual page 6

2.1 Procedure
viii.
Select the destination file.
In Destination File Name, enter the desired name for the file to be converted.
Note that the destination file name or location must be different from the source file name. If another
file with the same name already exists in that location, it will be automatically overwritten.
1.
Click the "..." button to navigate to the desired location and/or enter the desired name, for the
converted system data file.
2.
Click Save.
ix.
Click OK.
x.
Click Finish.
3.
Set up the new system version.
i.
Remove the current MPR card from the PBX.
ii.
Install the IPCMPR/IPCEMPR Card with either the DSP16/DSP64 Card mounted, in the PBX.
iii.
Initialise the system data.
1.
Slide the System Initialise Switch to the "SYSTEM INITIALIZE" position.
2.
Turn on the power to the PBX.
3.
While the RUN indicator is flashing, slide the System Initialise Switch back to the "NORMAL"
position.
iv.
Run Quick Setup.
1.
Connect to the PBX using the Maintenance Console.
A message will be displayed asking if you want to replace the language file and default value file
on the SD Memory Card with the data stored on the PC.
2.
Click Yes.
The new version language file and default value file for your country or area will be transferred from
the PC to the SD Memory Card.
When these files have been transmitted, the following message will be displayed:
"Please Initialise Reset the PBX"
3.
Click OK.
The PC will automatically disconnect from the PBX. It is not necessary to reset the PBX.
4.
Reconnect to the PBX using the Maintenance Console.
Quick Setup will restart automatically.
5.
Set the data items as prompted.
Quick Setup will finish.
4.
Restore the system data.
i.
Transfer the system data file that was converted in Step 3 from the PC to the SD Memory Card.
1.
From the Utility menu, select File Transfer PC to PBX (SD Card).
The Open dialogue box will be displayed.
6 MPR Card Conversion Guide
Reset Button
RESET
SYSTEM
INITIALIZE
NORMAL
System Initialise Switch