Furuno NAVpilot-700 Installation Manual page 68

3. INITIAL SETTINGS
Item
[WAYPOINT When you arrive at a waypoint on a route in the
SWITCHING] NAV mode, you can switch to the next way-
point automatically or manually.
The [AUTO] setting will automatically switch to
the next destination waypoint when your boat
is within the arrival alarm area (set on the
chartplotter).
The [MANUAL] setting requires operator con-
firmation (pushing the knob) before switching
to the next waypoint.
[AFTER Set how the boat is to be steered after arriving
ARRIVAL] at the last waypoint in a route, in the NAV
mode. This function is not available when boat
type is selected as sailboat.
Note: For Fantum Feedback
[GO STRAIGHT] and [ORBIT TO STBD] are
available.
[NAVNET2] The NAVpilot can automatically go to the NAV
mode when it receives a P sentence (FURUNO
proprietary) from a NavNet vx2 equipment. You
can turn this feature on or off. This feature is
invalid when you use the FishHunter
3-32
Description
TM
, only the items
TM
Settings
[AUTO], [MANUAL],
[GO STRAIGHT],
[ORBIT TO PORT].
[ORBIT TO STBD].
[FIGURE EIGHT TO PORT],
[FIGURE EIGHT TO STBD],
[SQUARE PORT],
[SQUARE STBD],
[OFF], [ON]
mode.