Desktop Mount - Furuno NAVpilot-700 Installation Manual

1. INSTALLATION
1.1.2

Desktop mount

Use the optional bracket installation kit to install the Control Unit on a desktop or the over-
head.
Bracket installation kit for FAP-7001
Type: FAP-7001-BRACKET, Code No.: 001-082-750
Name
Bracket
Connecting plate
Knob
Self-tapping screw
Pan head screw
Liner
Bracket installation kit for FAP-7011
Type: FAP-7011-BRACKET, Code No.: 001-082-760
Name
Bracket
Connecting plate
Knob
Self-tapping screw
Pan head screw
Liner
Procedure
The procedure shown below shows how to install the FAP-7001. The procedure for the
FAP-7011 is similar.
1. Fasten the bracket to the mounting location with four self-tapping screws (supplied
with option).
2. Detach the front panel and keypad assy., following the instructions provided.
3. Attach the connecting plate at the back of the Control Unit with four pan head screws
(supplied).
4. Screw knob bolts in connection plate, set the unit to the bracket, and tighten the knob
bolts.
5. Attach the front panel and keypad assy.
1-4
Type
64-028-1201-1 100-352-221-10
64-028-1201-1 100-356-381-10
64-028-1203-0 100-352-240-10
4x16 000-162-605-10
M3x12 000-163-809-10
64-026-1033 100-321-340-10
Type
64-028-3201-1 100-352-281-10
64-028-3202-1 100-356-451-10
64-1028-1203-0 100-352-240-10
4x16 000-162-605-10
M3x12 000-163-809-10
64-026-1033 100-321-340-10
Code No. Qty
1
1
2
4
4
2
Code No. Remarks
1
1
2
4
4
2