Paradox 1686V User Manual page 22

How do I program bypass entries?
1. Press the [
2. Enter your [
3. Illuminate the button(s) corresponding to the zone(s) you
wish to bypass by pressing the corresponding button.
Press the button again to turn it OFF. Press the [
button to erase all the current zone bypass entries.
4. Once you have entered the desired bypass entries, press
the [
ENTER
The [ ] button will turn ON when zones are bypassed.
BYP
The next time the system is armed, the zones will be
bypassed.
If you have access to both partitions, buttons [1] and
[2] will flash. Press the button corresponding to the
desired partition. The [
zones that are already bypassed will illuminate.
4.6.1 Bypass Recall Feature
After disarming the system, the bypass entries are erased.
The Bypass Recall Feature reinstates the previous bypass
entries saved in memory. There is no need to manually
reprogram bypass entries every time you arm the system.
How do I recall bypass entries?
1. Press the [
2. Enter your [
3. Press the [
4. Previously bypassed zones will illuminate.
5. Press the [
18 User's Guide
] button.
BYP
ACCESS CODE
] button to accept these entries.
] button.
BYP
ACCESS CODE
] button.
BYP
] button.
ENTER
] (see note below).
] button will flash and any
BYP
] (see note above).
]
FORCE