Paradox 1686V User Manual page 16

How do I program access codes?
1. Press [
ENTER
2. Enter your [
[ ] button flashes.
ENTER
3. Enter 3-digit [
The [
NUMBER
code (if programmed) and the [
(see Appendix A
4. Enter a new 4 or 6-digit [
[ ] button flashes. Return to step 3 to enter next code or
ENTER
press [
CLEAR
How do I delete access codes?
1. Repeat steps 1 to 3 (see above).
2. Press the [
code (4 or 6 times) until the keypad emits a confirmation
beep then press the [
Do not delete the System Master Code. Refer to the warning
in section 3.1 on page 10 for more information.
Section
[001]
[002]
[003]
[004] to [047]
[048]
12 User's Guide
].
MASTER CODE
] (see Table 1 on page 12).
SECTION
] corresponding to the first digit of the existing
on page 35
] to exit.
] button once for each digit in the access
FORCE
CLEAR
Table 1: User Code Sections
User Codes
User Code 001 = System Master Code
User Code 002 = Master Code 1
User Code 003 = Master Code 2
User Code 004 to User Code 047
User Code 048 or Duress Code
].
] button will illuminate
ENTER
).
ACCESS CODE
] button to exit.
].