Daewoo DWD-UD123X Service Manual page 39

2) Steam heating
1 The heater operates until the target water temperature is reached.
2 Steam heating temperature setting
Course
Power saving
Standard
Strong
3 When the target temperature is reached, the time set for steam heating is reduced.
3) Steam washing
1 The water temperature is maintained and the steam effect is maximized in this operation.
2 Steam washing time
Course
Power saving
Standard
Strong
Strong
3 The reserved washing v/v operates for three seconds every three minute to flow the water to the door glass.
4) Finishing steam water supply
1 Steam washing is completed and it is advanced to the main washing) For this purpose, the same water level as the
general standard is achieved.
2 The time set for water supply is one minute.
5) Finishing steam washing
1 It is required when you failed to reach the target temperature in the main washing.
2 The time set for water supply is 25 minutes.
6) Main washing
1 Same as the general standard washing.
Temperature setting
70ûC
75ûC
90ûC
Temperature setting
7 min
10 min
15 min
25 min
37
Time setting
15 min
15 min
20 min
Time setting
70ûC/75ûC
75ûC/80ûC
90ûC/95ûC
90ûC/95ûC