Daewoo DWD-UD123X Service Manual page 33

1 Washing Heater isn't reworking after reach decision temperature.
2 The washing time is divided into the heating time and the main washing time that follows it. The heating time is gone
immediately after the heating is finished or stopped until the heating is completed.
3 The heating time for the standard course with water temperature of 40 degrees includes seven minutes without any heating in
the early stage. During this period, the textile is soaked in water fully before heating can be done, so that the temperature drop
in the washing tank caused by water supply after heating starts can be prevented.
4 The main washing time of 40 minutes is only for the standard course with water temperature of 40 degrees.
5 If the LS is greater than 480 for the standard course, one hour of extra washing time is added. The result is 2:47.
- Achieving target cleanness (for post management)
3) Electric Current Time of Washing Motor
Part
수위
Course
0~40℃
Normal
60℃
95℃
Whites
30~40℃
60℃
Steam soak
95℃
0~40℃
Heavy stain
60℃
cold
Delicate
cold
Blanket
0~40℃
Sports shoes
cold
rag
cold
stocking
cold
lingerie
30~40℃
Baby care 60℃
95℃
Tub clean cold
1 It works decision cycle.
2 If Motor Restriction occur by overload, Motor try to rework opposite direction.
3 While Water Supply, Motor Stick proceed ON first.
4 Crease Care is process of removal laundry that stick to drum It works after Spin Sequence.
5 The heating washing motor conduction on/off time for the steam boiling and baby care course refers to finishing
washing.
6 The motor conduction on/off time for steam heating/washing in the steam boiling and baby love course are 10/5 and
18/6.
7 The motor speed for the stocking and lingerie course is 35 rpm.
MOTOR TIME On/Off (sec)
Washing
Water Supply
Heating main Washing
5/15 10/10
5/15 10/10
5/15 10/15
5/5 10/10
5/5 10/10
5/5 10/15
5/15 18/7
5/15 18/7
X X
5/15 X
5/15 10/10
5/15 X
X X
X X
5/5 10/10
5/5 10/10
5/5 10/15
5/15 X
31
Soal Crease care
18/6 15/180 10/5
10/10 15/180 10/5
7/15 15/180 10/5
10/10 15/180 10/5
10/10 15/180 10/5
7/15 15/180 10/5
10/5 15/180 10/5
10/7 15/180 10/5
2/15 X X
10/7 X 10/5
10/7 15/180 10/5
18/6 15/180 X
1/5 X X
1/5 X X
10/10 15/180 10/5
10/10 15/180 10/5
7/15 15/180 10/5
10/30 15/180 10/5
Speed
45 r.p.m
45 r.p.m
45 r.p.m
45 r.p.m
45 r.p.m
45 r.p.m
45 r.p.m
45 r.p.m
45 r.p.m
45 r.p.m
45 r.p.m
35 r.p.m
35 r.p.m
35 r.p.m
45 r.p.m
45 r.p.m
45 r.p.m
45 r.p.m