Table of Contents
Advertisement
Operation
This section discusses how to connect, configure, and operate the MPS 602. Topics that
are covered include:
•
•
•
•
•
Front Panel Operation
ab
c
d
RGB
EXEC
1
2
MODE
CONFIG
Figure 12.
a
b
c
Input Switching
The controls for the two independent switchers are grouped by input type:
•
•
NOTE: Audio for the the selected input is routed to all audio outputs. When program
d
e
Front Panel Operation
HDMI/DTP Embedded Audio Output
Program Audio
EDID Minder
HDCP
e
f
INPUTS
1
2
3
4
5
Front Panel Details of the MPS 602 Switcher
Power Indicator — This LED lights when power is applied.
Executive Mode indicator LED — This red LED lights when Executive mode (front
panel lockout) is active.
USB Configuration Port — Mini type-B female USB jack for configuration of the
switcher and firmware upgrades.
Analog RGB inputs (1 and 2) routed to the rear panel RGB output (see figure
c
page 5,
).
Analog RGB inputs (1 and 2) and digital video inputs (3 through 7) routed to the HDMI
or DTP digital outputs (see figure
audio breakaway is active (see
input LED corresponding to the breakaway audio blinks while the input LED for the
selected video remains lit solid.
RGB Inputs (local monitor output) — Buttons 1 and 2 of the RGB input group select
the input for the RGB output. The LEDs to the right of each button (when lit) indicate the
selected RGB input routed to the RGB output.
RGB Inputs (digital output) — Buttons 1 and 2 of the Inputs group select the input
for the HDMI or DTP output and audio switcher section. The LEDs to the right of each
button (when lit) indicate the selected input.
g
h
i
MIC
MUTE
6
e
i
2
on page 5,
and
).
Program Audio Breakaway
j
k l
PROGRAM AUDIO
MUTE
MPS SERIES
MEDIA PRESENTATION SWITCHER
2
on
on page 15), the
MPS 602 • Operation
12
Advertisement
Table of Contents
