Dual Monitor - Furuno FCV-30 Operator's Manual

3.10 Dual Monitors
Dual monitors can be used by connecting a monitor to the USB port on the processor unit
with a USB-VGA (or SVGA) adapter. For monitor connection and display setting, see your
dealer.
Do the procedure below to use dual monitors.
1. Click Disp on the menu bar.
2. Click Mode.
3. Click ▼ in the Display mode box.
4. Click USER1, USER2 or USER3. The Beam window box becomes active. For the USER
display, set two displays among SPLIT and BEAM1 – BEAM5. See page 3-2.
5. Click ▼ in the Beam window box then select ON.
The Zoom location box becomes active and the display within the Preview window
changes according to the selection done at at step 4. If the user display includes the
SPLIT display, the SPLIT display appears on the main monitor. If you only set beams,
the display at right in the Preview window (selected from the Display mode box) appears
on the main monitor.
Mode setting window (USER2 selected)
3. CHANGING SETTINGS
3-23