Furuno FCV-30 Operator's Manual page 51

11. Click the Open button to start playback.
Playback start point
slider bar
Play mode
Select recording
settings.
Auto: Recording's
settings
Manual: User settings
Notes on playing back data
• Use the Play mode Auto and Manual radio buttons to change setting data:
Auto: Use settings used in the recording.
Manual: Apply current settings.
• To playback from a specific location, use the playback start point slider bar to choose
the location then click the Restart button.
• To adjust playback speed, use the Play interval slider bar. Slide the bar rightward to
slow playback. The indication below "Play interval" is the interval between pings. For
example, "500 ms" means that there is a 500 ms delay between pings.
• To pause playback, use the Pause button.
• To restart playback, use the Restart button.
• To stop playback, use the Stop button.
Play interval Check to repeat playback.
slider bar
Play dialog box
1. OPERATIONAL OVERVIEW
Date of recording
Current time in recording
Current ping no./
Total no. of pings recorded
1-41