Furuno FCV-30 Operator's Manual page 60

2. WINDOW DISPLAYS
Setting up the fish size histogram dialog box
1. Click Setting.
2. Click Fish size.
Fish size histogram dialog box
Note: If the Target graph dialog box appears, click the Fish size histogram tab.
Menu item
Display tab
Horizontal axis scale
Vertical axis area
Vertical zoom rate
Vertical zoom area
White mark
White mark area
(Min and Max)
Peak
Window size
Radius
(Continued on next page)
2-6
Description of Fish size dialog box
Choose the horizontal axis scale, from 10-100(%).
Choose the vertical axis scale from 1-6.
Choose the vertical zoom rate for the fish histogram display from
100, 200 or 400(%).
Choose center position of vertical zoom on the fish histogram
display among 1-7. 1 is the shortest, 7 is the longest.
Turn the white mark on or off. When turned on, the bar graph within
the white mark range is displayed in white if the background is
black, or black if the background is white.
Choose the minimum and maximum range of the white mark. The
setting range is 2-1000(cm)
Turn peak display on or off. When turned on, the representative
peak value on the bar graph is displayed.
Select the size of the fish histogram. The higher the number, the
larger the fish histogram.
Select the radius scale for the target. The higher the number the
larger the radius.
Description