l-com 16-CH User Manual page 59

The general operations are as below:
▲▼◄►
Press these buttons to select the items.
ESC
Press this button to escape from this screen, and return to split-window display.
MODE => Refresh
Press this button to refresh the log display. If there are new event logs after the screen is
last updated, the log list shown will be updated accordingly.
SEQ => Page Up
CALL => Page Down
Press SEQ/CALL to Page Up/Down the Log display.
Numeric (ENTER)
Press these buttons to select the display page of the event logs, the log list will also be
updated.
Following is a brief description for each item and its specific operations:
Event Type – the type of the events (Record, Alarm, Motion, Video Loss, System) to
be shown in the log list. The Event Type "System" includes all system related events,
such as power on/off, and will not trigger recording. Press ENTER or to check/uncheck
the event type for the log list.
Source ID – the source which triggered the event. For Alarm, it's the alarm input
number; for Motion and Video Loss, it's the camera number. It's used to filter the events
to be shown in the log list. Press ENTER to check/uncheck each item.
Log List – the event logs according to the Event Type and Source ID selected. The user
may (1) press ENTER to enter Event Playback display of the selected event log in this list,
(2) press Play Buttons (
( ) to backup (copy) the selected recorded video/audio to the connected backup device
without playback.
Please note that this kind of backup is performed in the background, and the user
can still do almost all the operations. Please refer to Section 8.5 Playback For Search
By Event for the detailed operations for event playback.
Note: For internal DVD, please open the front door in order not to block the tray from
ejecting, esp. while it's in backup process. Blocking the tray from ejecting
may damage the DVD writer.
, ) to playback it directly, or (3) press Copy Button
The Backup display (described in Section 8.4) will be shown.
58