Basic Operations - l-com 16-CH User Manual

There is one factory-preset login name/password aa/11 at Administrator level. The user
can use it to login the system for the first time.
Should the user have forgotten all the administrator-level passwords, please contact the
local dealer or installer to recover from it.

4.3 Basic Operations

The basic user's operations after he/she has logged into the system are described below:
Numeric (ENTER)
Press these buttons to change the camera for the focus window.
exists in the other window, the focus window will exchange with that window for the
cameras.
Alarm Reset
Press this button to cancel alarm activation, i.e. reset the alarm outputs and silence the
buzzer.
MODE (Administrator/Supervisor)
In split-window display, press this button to change circularly the live/playback mode for
the focus window and the other windows that form a rectangle on the screen.
note that the rectangle can contain at most 16/9 split windows.
SEQ
Press this button to switch to or return from SEQ display mode. In SEQ display mode,
each page in the sequence will be shown for the preset page dwelling time sequentially,
and SEQ icon will be shown on the lower-right corner of the screen.
CALL
In split-window display, press this button to switch to or return from full screen display of
the focus camera.
SEARCH (Administrator/Supervisor)
In split-window display, press this button to display the search menu. The system will
remember the last one the user chose.
REC
Press this button to force manual recording. To stop manual recording, press it again.
All cameras will be recorded as if the scheduled record is A/V, and REC will be shown on
the lower-right corner of the screen if manual recording is ON.
MENU
In split-window display, press this button to display the main menu.
20
If the camera already
Please