l-com 16-CH User Manual page 38

Following is a brief description for the operations:
Numeric
Press these buttons to select the camera.
▲▼◄►
Press these buttons to move the Mask window.
+/-
Press these buttons to resize the Mask window.
ENTER
Press this button to set/reset the area under the Mask window.
MODE
Press this button to set/reset the whole video area.
SEQ
Press this button to decrease the sensitivity, from 10 – 1, for the motion detection of
this camera.
CALL
Press this button to increase the sensitivity, from 1 – 10, for the motion detection of
this camera.
SEARCH
Press this button to test the motion detection of this camera. The detected motion
will be shown on the screen. Press this button again to stop testing.
ESC
Press this button to escape from Motion Detection Setup, and return to Motion Setup.
37