Hdd Setup - l-com 16-CH User Manual

Normal – normal record mode, including No, V (Video only), or A/V (Audio/Video).
Press +/- buttons to change the value.

6.6 HDD Setup

In Setup Menu display, press ▲▼ to change the highlighted option to HDD, and then press
ENTER to call up HDD Setup as shown.
In the surveillance applications, alarm video/audio is much more important than normal
video/audio. So, this digital video/audio recorder is designed to allow the user to divide
each HDD into alarm partition and normal partition. Alarm video/audio will be recorded in
alarm partition, normal video/audio in normal partition.
The HDD Setup allows the administrator to format/clear each HDD, set Alarm Record size
and Normal Record size of each HDD, and define the behaviors for Alarm Record and
Normal Record if it reaches the end of the last HDD in the system.
The general operations are as below:
▲▼◄►
Press these buttons to select the items.
MODE => Format/Clear
Press this button to format/clear the HDDs as described in
ESC
Press this button to escape from this screen, and return to Setup Menu display. If the
Save dialog is shown, press ENTER to exit and save, ESC to exit without saving.
Following is a brief description for each item and its specific operations:
Size (GB) – the total HDD storage in GB (Giga-Byte) for Alarm Record and Normal
Record respectively. This item is just for information. Please refer to
more detailed information and setup of each individual HDD.
Section
43
6.6.1.
Section 6.6.1 for