Table of Contents
Advertisement
8. Search/Playback/Archive (Administrator, Supervisor)
There are five ways to search the recorded video/audio for playback:
(a) Search by time,
(b) Search by event,
(c) Search archived files
In split-window display, press SEARCH button to call up Search Menu display as shown.
The user's operations are described as the followings:
▲▼
Press these buttons to change the highlighted
item.
ENTER
Press this button to enter the corresponding Search display of the highlighted item. The
Search displays and their operations are described in the following sections, followed by
the playback operations of the searched video/audio.
ESC
Press this button to escape from Search Menu display, and return to split-window display.
8.1 Search By Time
The screen for Search By Time is shown on the right
side:
The Status field will show the 'Recorded from' time
based on the selected Video/Audio before searching -
alarm partition if any of Alarm, Motion, or Video
Loss, is checked, and normal partition if Normal is
checked.
The general operations are as below:
▲▼
Press these buttons to select the items.
ESC
Press this button to escape from this screen, and return to split-window display.
SEARCH / MODE
Press this button to start searching the recorded video/audio with the selected search time
and video/audio type for playback. The search result will be shown on the bottom of
this dialog if it failed. If there's no camera in playback mode, up to 4 cameras in the
current split window will be set to playback mode.
56
Advertisement
Table of Contents
