Table of Contents
Advertisement
◄►
Press these buttons to pan the camera left/right.
ZOOM (
) +/-
Press these buttons to zoom in/out the camera.
GOTO
Press this button to move the camera to the preset position. Press numeric buttons
00-99 to enter the number of the preset position to move the camera to.
NEXT
Press this button for the next miscellaneous function.
include Focus, Iris, Auto PAN, SEQ, Preset, and Pan Speed. And the active one will be
shown on the lower right corner of the screen. The miscellaneous function specific
operations are described in the following table.
Miscellaneous function specific operations:
Active function
Focus
Iris
Auto Pan (3)
SEQ (5 sec.)
Preset (1)
Pan Speed (3)
Operations
Descriptions
+/-
focus far/near
ENTER
auto focus
+/-
Iris increase/decrease
Auto pan speed is shown in parenthesis
+/-
increase/decrease speed
ENTER
start/stop Auto Pan
*
set start position
#
set end position
SEQ dwell time is shown in parenthesis.
+/-, NUMBER
change dwell time
ENTER
start/stop SEQ mode, an asterisk (*) will
Preset location is shown in parenthesis
+/-, NUMBER
change Preset location
ENTER
set Preset location
Manual pan speed is shown in parenthesis
+/-
increase/decrease speed
55
The miscellaneous functions
If SEQ mode is on, the camera will
preset position 0-9 (or 1-10) sequentially.
be shown if SEQ mode is on
Advertisement
Table of Contents
