Advanced Hdd Setup - l-com 16-CH User Manual

contents will be cleared.
ESC
Press this button to escape from this screen, and return to HDD Setup display. If the
Save dialog is shown, press ENTER to exit and save, ESC to exit without saving.
Following is a brief description for each item and its specific operations:
Alarm Recording HDD – the current HDD for alarm recording. This item is just for
information.
Normal Recording HDD – the current HDD for normal recording. This item is just for
information.
Size (GB) – the total storage in GB (Giga-Byte) for this HDD if it has been formatted.
This item is just for information.
Alarm Record(%) – Alarm Record Size (in percentage) for this HDD. Please follow
the Text Input method described in Section 4.1 to change the value.
Normal Record(%) – Normal Record Size (in percentage) for this HDD. It equals to
(100% - Alarm Record Size). This item is just for information.

6.6.2 Advanced HDD Setup

Here is the action list to set up while HDD is failed in DVR operation:
Duration – response duration to define at most how long (in seconds) the Alarm Out
relay and the Buzzer will keep being triggered after the HDD failed. Press +/- buttons to
adjust the value (3 seconds - 60 minutes, discrete, '-' for 'Forever').
Alarm Out – to define which Alarm Output will be triggered when HDD is failed.
Press +/- buttons to select none (N/A) or one of the Alarm Outputs (1-4).
46