Pre-Camera Setup - l-com 16-CH User Manual

If the user wants to reset all the settings to factory default values, he/she may press ▲▼ to
change the highlighted option to Factory Defaults, and then press ENTER. A confirmation
dialog will be shown, press ENTER again to make the changes, ESC to not do it.

6.1 Pre-Camera Setup

In Setup Menu display, press ▲▼ to change the highlighted option to Pre-Camera, and then
press ENTER to call up Pre-Camera Setup display as shown.
There are up to 16, 9, or 4 cameras which can be connected to the system. The Pre-Camera
Setup allows the administrator to define some fundamental attributes, which may relate one
camera to the others, for all the installed cameras.
The general operations are as below:
▲▼◄►
Press these buttons to select the items. The display will scroll up/down if the selected
item is not shown on the screen.
Numeric (ENTER)
Press these buttons to select the camera.
ESC
Press this button to escape from this screen, and return to Setup Menu display. If the
contents have been modified, a Save dialog will be shown to ask the user to save the
changes, press ENTER to exit and save, ESC to exit without saving.
Following is a brief description for each item and its specific operations:
REC Resolution – the record resolution for all the cameras in the system. For NTSC, it
can be 720x480, 720x240, or 360x240; for PAL, 720x576, 720x288, or 360x288. Press
+/- buttons to select the resolution.
30