Seq Display Setup - l-com 16-CH User Manual

6.4 SEQ Display Setup

In Setup Menu display, press ▲▼ to change the highlighted option to SEQ Display, and
then press ENTER to call up SEQ Display Setup as shown.
The SEQ Display Setup allows the administrator to define the display pages in SEQ Display
for main monitor and call monitor. There are up to 7 display types - 1-Window, 4-Window,
7-Window, 9-Window, 10-Window, 13-Window and 16-Window - for main monitor, and 1
display type for call monitor.
The general operations are as below:
▲▼◄►
Press these buttons to select the items.
ESC
Press this button to escape from this screen, and return to Setup Menu display. If the
Save dialog is shown, press ENTER to exit and save, ESC to exit without saving.
Following is a brief description for each item and its specific operations:
Total Pages – total pages for this SEQ Display Type. The maximum number varies
according to the display type. Press +/- buttons to select the desired number from the
available list.
Dwell Time – the dwell time (3 ~ 60 seconds, discrete) for each page of this display type.
Press +/- buttons to change the value.
Page Settings.. – used to set the camera in each viewing window for each page of this
SEQ Display Type. Press ENTER to call up Display Page Setup as shown.
40