Table of Contents
Advertisement
1.0 IMPORTANT SAFETY INFORMATION
The presence of this symbol
Please read all manuals fully before installation, operation or maintenance.
Follow all warnings and instructions marked on the product.
Refer installation and service to suitably qualified personnel only.
1.
The power supply must be earthed via the 3 pin ac mains socket on the front panel. It is
dangerous to operate the printer system without an earth connection.
2.
The printer, power supply and touch screen contain no user serviceable parts. Apart from
removal of the ribbon magazine no other part of the equipment should be opened or dismantled
by the user unless suitably trained/qualified to do so.
3.
The power supply operates from dangerous voltages and must be disconnected from the ac
mains supply before removal of the top cover.
4.
To disconnect the ac mains supply remove the power connector from the ac mains socket on
the front panel of the power supply.
5.
Fuses must only be replaced with those of the same type and specification. Types and ratings
are given in the power supply manual.
6.
Only operate the printer from the type of mains supply specified on the rear panel of the power
supply.
7.
Disconnect the ac mains supply before connecting or disconnecting Thermocode iQ
components.
8.
Disconnect the ac mains supply whenever cleaning or maintenance is undertaken.
9.
No part of the printer system is waterproof or pressure washable.
10.
Do not use the any part of the printer system near water. Do not allow liquid to be spilt onto any
part of the printer system.
11.
Do not place any part of the printer system on an unstable stand, table or machine. Operator
injury and/or product damage may result from the product falling.
12.
Do not insert foreign objects into any apertures in the printer system. Damage, short circuits or
electric shock may result.
13.
Do not use the product in areas where explosive gasses or substances are present.
!
Disconnect the ac mains supply and refer to qualified personnel under the following
conditions:
If the cabling and/or part of the hardware appears damaged.
If liquid has been spilt onto or into any part of the hardware.
If the product malfunctions or fails to operate normally when the user instructions and the
troubleshooting guide are followed.
12.10.12
!
in the text indicates potential risk to equipment or personnel.
Page 6
Issue 1
Hide quick links:
Advertisement
Table of Contents
